The Magnum Reloaded, including floaters weighs 251 grams. I never flew with the floaters since the plane is not over powered, so put it mildly.
MR: step 7 Wrapping up
Reply
Category Archives: Make
MR: step 6 Connections and support
I didn’t like only magnets to hold the main wing. To get a better connection I used some nails to secure the rear end of the wing.
MR: step 5 Hinges, horns and servo controls
The rudder and elevator have servo horns. I made them with 1mm multiplex but plastic or bought ones will do as well. For the hinges I bought special hinge tape from HobbyKing.
MR: step 4 Painting
MR: step 3 Installing Electronics
Installing the electronics is straight forward. Put the battery as far forward as possible. The ESP and receiver go in the fuselage above the wing.
MR: Step 2 Create space in fuselage
To accommodate the electronics I created the space above the wing in the fuselage. The battery is behind the motor, as far forward as possible. Cut away a much as possible with a knife. In difficult spots, I used a hot nail to burn away the epp. The nail has been bent in a 90 degree angle.
MR: step 1 Motor support
I started building the support for the motor Turnigy Park250, outrunner 1680kv, the wrong way. This was my first brushless motor. I had to cut the slot when the everything was glued. It is easier to cut the slot first.
MR: Building sequence
Building sequence of the Magnum Reloaded. You can adapt it a little. It is important to plan the steps: the create space, sanding and painting.
Finger joint
How to make finger joints, the easy way, with a tablesaw sled and a simple jig.
Magnum Reloaded (MR): Buying stuff
In our sports hall we have the opportunity to fly with model airplanes. Last year, I saw the Magnum Reloaded flying. The pilot was very enthusiastic about the plane. Long story short, I decided to build one myself. Browsing the internet, I found many Magnum’s but not clear building instructions. It’s not a difficult plane to build. I will try to document the buying and building process. Continue reading